![]() |
| | #1 |
| Posts: n/a | Got damn i'm tired of this sh*t .... I've just downloadet a Toyota GT-one for vice city and replaced it with the hotring. BUT when i try to drive in it the wheels doesn't even touch the ground!!!!!! I've looked at the lower and upper suspension level (in handling.cfg ofcourse) and they looked fine.... So i don't understand what's wrong.... can anybody help me???? Plz ![]() |
|
| | #2 |
| Member ![]() Join Date: Aug 2003 Posts: 2,310 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | do they LOOK fine or are they really fine? adjust them. lower the suspension. look in the default.ide and make the wheels bigger if you want. if nothing works, then contact the author. __________________ brokenfish |
| | |
| | #3 |
| Posts: n/a | Well they look fine.... The handling line is 1200.0 2.1 4.5 2.1 0.0 0.1 -0.15 70 1.19 0.86 0.52 5 368.0 46.3 R P 7.3 0.48 0 33.0 1.8 0.10 1.00 0.27 55000 0.30 -0.10 0.5 0.0 208102 1 1..... I'm not so good at modding but i tries to learn it..... The car should originally be changed with the Deluxo but i wanted it to be changed with the Hotring Racer.... Coould that have something to do with it??? I've changed the wheel-size to 1.1 and it's only a few times the wheels touch the ground I hope some of you can help me.... Because it's a really cool car ![]() |
|
| | #4 |
| Member ![]() Join Date: Aug 2003 Posts: 2,310 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | what car it replaces does not matter. what do the instructions of the car tell you to do? just use the same ones. make sure you set the wheelsize right too. __________________ brokenfish |
| | |
| | #5 |
| Posts: n/a | Broken i beg to differ, when putting the dff in, most mods,(car wise) are cloned to use the same handling structure and such with the car it was cloned after, then they change the model, replacing the correct vehicle does matter but not all that much |
|
| | #6 |
| Member ![]() Join Date: Aug 2003 Posts: 2,310 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | no, it does not matter. you just have to make the right adjustments. the dff is only the model. the col is only the collision. the handling.cfg. handles the car handling ![]() and so on. the only things you cannot replace randomly with others are planes, bikes, or helicopters. cars cant replace those... :p __________________ brokenfish |
| | |
| | #7 |
| Posts: n/a | I've did just like there stood in the readme (i've installed a lot of other cars!). The wheelsize is the same as in the readme and the handling.cfg is also the same. It's like the bottom doesn't touch the ground and the wheels doesn't touch the ground!? It works if i raise the suspension but that looks very stupid! I just don't know what the f*ck I should do ![]() |
|
| | #8 |
| Member ![]() Join Date: Aug 2003 Posts: 2,310 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | maybe its just a badly modeled car! contact the author about it and get him to fix the wheels. __________________ brokenfish |
| | |
| | #9 |
| Posts: n/a | I'll try to download it on another homepage (just wanna try it) and if it doesn't work i will find another replacement. |
|
| | #10 |
| Member ![]() Join Date: Aug 2003 Posts: 2,310 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | why not just get the author? or you could try default.ide resizing the wheels if nothing else works. __________________ brokenfish |
| | |
| | #11 |
| Posts: n/a | I've tried to change the wheelsize but if i need to make the wheels touch the ground they need to be so big that it look.... Well wierd :p I don't wanna use so much time on this so i'll just download another car.... BTW thanks for trying to help me ![]() |
|
| | #12 |
| Member ![]() Join Date: Aug 2003 Posts: 2,310 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | no problem, thats why im here ![]() __________________ brokenfish |
| | |
![]() |
| Thread Tools | |
| Display Modes | |
|
|